top of page

Order Form

Contact Information
(*all fields are required)

General Terms

This order form is NOT a contractuel agreement. A formal estimate/invoice will be issued after this form is submitted. 

** All prices are exclusive. Any customs and fees are the responsability of the buyer.

​

All Cine RT products are covered under a one year warranty.

Order Selection :

Complete Cine RT System Package
Cine RT-V

Focus Bug.jpg

Price (euros) : 9 700€ HT

Includes :
1xUltrasonic Base Sensor UBS-100

1x Handset Control Unit HCU-100

1xUltrasonic Transmitter Bug BUG-100

1x High Bright LED Display HBD-100

3x Cine RT Mounting Blocks (buyers choice)

1x USB Charging Cable

1x AC Wall Charging Unit

1x Spare antenna & 4 spare mounting block screws

1x Pelican 1200 Case

Cine RT System Package Light
Cine RT System Package without High-Bright Display
Cine RT-Light

Kit light.png

Price (euros) : 8 675 € HT

Includes:

1 x Ultrasonic Base Sensor UBS-100

1 x Handset Control Unit HCU-100

1 x Bug Ultrasonic Transmitter BUG-100

1 x AC Wall Charging Unit

1 x USB Charging Cable

2 x Cine RT Mounting Blocks

1 x spare antennae and 4 spare mounting block screws

1 x Pelican 1200 Case

 

The Cine RT System Package without High-Bright offers all the great features of the System Package minus the High-Bright LED Remote Display.  Please note:  Accessories, Power Cables, Serial Cables and Y Cables are sold separately.

Cine RT Rangefinder Package
Cine RT-Light +

Rangefinder Kit.png

Price (euros) : 8 290 € HT

Includes:

1 x Ultrasonic Base Sensor UBS-100

1 x Handset Control Unit HCU-100

1 x AC Wall Charging Unit

2 x Cine RT Mounting Blocks

1 x spare antennae and 4 spare mounting block screws

1 x Pelican 1200 Case

​

The Cine RT Rangefinder Kit exploits all the ultrasonic rangefinder operations remotely, offers Tape Mode via the Handset Controller and lays the groundwork for future system expansion.  Please note:  Accessories, Power Cables, Serial Cables and Y Cables are sold separately.

Cine RT System Package "Loueur"
Cine RT-V+

DSC02705.jpg

Price (euros) : 15 490 € HT

Safety box.jpg

Includes:

1xUltrasonic Base Sensor UBS-100

1x Handset Control Unit HCU-100

1xUltrasonic Transmitter Bug BUG-100

1x High Bright LED Display HBD-100

3x Cine RT Mounting Blocks (buyers choice)

1x USB Charging Cable

1x AC Wall Charging Unit

1x Spare antenna & 4 spare mounting block screws

1x Extra Ultrasonic Transmitter Bug BUG-100

1x Extra Mouting block

2x Power cables 2 pin LEMO Right Angle 36"

2x Power cables3 pin FISCHER Right Angle 36"

2x Power cables Anton Baueur P-Tap Right Angle 36"

2x Serial cable Preston MDR 3/4* (connector is a straight 4 pin LEMO)

2x Serial cable ARRI LCub/UDM (7 pin FISCHER) to Cine RT

2x Serial Cable ARRI EXT (connector is a straight 16 pin LEMO)

​2 x Serial Cable ARRI RIA-1/Alexa 35 : 6 pin Lemo (RA) to 4 pin Lemo (ST)

​

1x Pelicase 1490

1x Safety Box 1060 with separator for Handset, High Bright Display, 2 Bugs Tx, screws box

1 x Silicone Handset Skin - Protective Silicone Skin for the HSU-100 Handset

1x Noga Arm - LC9014

1x Ultrasonic Horn Protector UHP-100 3D Print

1x Package of 3 antennas protections C1,C2,C3

1x Bug transmitter Case (Protection/Fixation) S6

1x CVolution to High Bright display/Handset S4

1x Cvolution to High Bright Display top of the Cvolution S7

1x WCU4 to High Bright Display/Handset. Top/Bottom of the WCU4 S5

1x WCU4 to High Bright Display. Top of the WCU4 S2

1x WCU4 to High Bright Display. Top of the WCU4 S8

1x PRESTON to Hight Bright Display S3

1x Fixation plate for High Bright Display P1

1x Fixation plate for Handset P2

Additional Ultrasonic Transmitter Bug 
UBT-V

transmitter.png

Price (euros) : 770 € HT

Includes:

1 x Bug Ultrasonic Transmitter Bug-100

1 x USB charging cable

High-Bright LED Display additional
HBLD-V

highbright front.png

Price (euros) : 1 765 € HT

Includes:

1x Hight-Bright LED Display HBD-100

1x AC Wall Charging Unit

Power Cables

Choose power cables for your Cine RT system:

​

- The Base, Handset and High-Bright Display each use a 2 pin Lemo power connection.

- The Bug Tx charges via the included USB cable.

- Standard cable lengths are: 24" (61cm) or 36" (91cm)

​

Prices: 

 Standard length Power Cable (24"or 36"):  138 € HT (euros)

 Charge for custom cable lengths:  +35 € HT /custom cable.​

​

Notes:

* Connectors are marked either Straight (S) or Right-Angle (RA).

* Right Angle connectors direct the cable to the backs of all units

** Please note the following component voltage requirements: **

   - CineRT Base unit (horns):  9-30 V

   - CineRT Handset unit: 7-20 V

   - CineRT High-Bright LED Display: 7-20V

​

 Accordingly, 3 pin Fischer cables (24V) are recommended ONLY for the Base unit.

Pwr Cable.png

POWER CABLE SELECTION

Serial Cables

​

 

- Cine RT Serial Cables contain in-line active electronics necessary to communicate with most available lens control systems (LCS)

​

The Cine RT end of the Serial Cable is a custom-keyed 6 pin LEMO Right-Angle connector.

- Standard cable lengths are: 24" (61cm) or 36" (91cm)

​

Serial Cables are available with the following 3rd party connections:

​

 - Preston MDR 3/4* (connector is a 4 pin LEMO available in Straight or Right-Angle)  - Cable price 331 € HT

​

 - ARRI LCube/UDM (connector is a Straight 7 pin FISCHER) - Cable price 331 € HT

​

 - ARRI EXT (connector is a Straight 16 pin LEMO) - Cable price 360 € HT

​

- ARRI RIA-1 / ALEXA 35 (ST) - Cable price 331 € HT

​

 - Cmotion Camin (connector is a Straight 8 pin LEMO) - Cable price 331 € HT

​

 - Teradek RT MDRX (connector is a Straight 5 pin LEMO) - Cable price $200

​

​

*Preston cable will also work with the Preston MDR 2 if it has been upgraded to a 4 pin Serial port.

Serial Cable (1).png

SERIAL CABLE SELECTION

​

 

- Cine RT "Y" Cables contain in-line active electronics necessary to communicate with either the Preston MDR series, ARRI L-Cube/UDM or Cmotion Cvolution lens control systems (LCS) as well as extra power filtration to power your Cine RT directly from your LCS  without interference from "noisy" motor control units.

​

The Cine RT ("Y") end of the Serial Cable has two connectors: a Right Angle (RA) custom-keyed 6 pin LEMO connector & a Right Angle 2 pin LEMO power connector.

​

"Y"  Cables are available with the following 3rd party connections:

​

 - Preston MDR 3/4* (connector is a 4 pin LEMO available in Straight or Right Angle) - Cable price 415 € HT

​​

 - ARRI LCube/UDM (connector is a straight 7 pin FISCHER) - Cable price 415 € HT

​

 - ARRI EXT (connector is a straight 16 pin LEMO) - Cable price 440 € HT

​

- ARRI RIA-1/ALEXA 35 - Cable price 425 € HT

​

 - Cmotion Camin (connector is a straight 8 pin LEMO) - Cable price 415 € HT

​

​

*Preston cable will also work with the Preston MDR 2 if it has been upgraded to a 4 pin Serial port.

y cable white bg (1).png

"Y" (serial and power) Cables

"Y" CABLE SELECTION

Mounting blocks

- 3 Mounting Blocks are included free of charge in the system package.

- Extra mounting blocks are 44 € HT each

MOUNTING BLOCK SELECTION

1_4_ _ 20 threaded mounting block.png

- 1/4" / 20 threaded

  low-profile mounting block

3_8_ threaded mounting block.png

- 3/8" threaded

  low-profile mounting block

Cinelock cradle mounting block.png

- Cinelock cradle 

low-profile mounting block

Bottom mount (1_4_ & 3_8_) mounting block.png

- Bottom mount (1/4" & 3/8")

mounting block. (1/4" bottom mount is not visible in this picture)

Other accessories

Antenne.jpg

Price (euros) : 20 € HT

Extra Antenna

EXANT

UHP 100-3_edited.jpg

Ultrasonic Horn Protector

- Ultrasonically transparent dust protection for your Cine RT base sensor.

UHP-100

Price (euros) : 265 € HT

Programmeur.png

System Programmer

​

Includes:

  • 2x Professional Grade Lemo Connectors

  • 1x USB 2.0 Cable - A-Male to Mini-B

 

Connect the System Programmer to your home computer via USD to upload Firmware updates to Cine RT Base Sensor and Handset components via Lemo Data Ports.

PRG-100

Price (euros) : 375 € HT

noga.png

Mini Noga Arm

NOG

Price (euros) : 165 € HT

Peli 1490.jpg
DSC02705.jpg

Pelicase 1490

​

Dimensions intérieures 451 x 290 x 105 mm

DImensions extérieures 505 x 354 x 119 mm

Profondeur du fond 67 mm

Profondeur du couvercle 38 mm

Poids sans mousse 2.5 kg

Poids avec mousse 2.9 kg

Flottabilité 18.6 kg

Plage de température -40°c / 99°c

​

PELI1490

Price (euros) : 260 € HT

0411B0F5-C3C4-4F3D-8AB4-9077232DFDBD.JPG
9E021EBD-3CD6-4020-8931-95605D2E6E5D.JPG

"Safety Box" Pelicase 1060

​

Pelicase 1060 with separator for Handset, High Bright Display, 3 Bugs TX, screws box

Handset, High Bright Display, 2 Bugs TX, Antennas protection not included

​

Dimensions intérieures 210 x 108 x 57 mm

Dimensions extérieures 251 x 142 x 67 mm

Profondeur du fond 37 mm

Profondeur du couvercle 18 mm

Poids 0.5 kg

Flottabilité 1.1 kg

Plage de température -23°c / 93°c

​

PELI1060

Price (euros) : 120 € HT

3D PRINT ACCESSORIES

Base Unit.jpg
C3V6-b.PNG

Price (euros) : 50 € HT

 Antenna case protection for Horns

C3

Handset.jpg
C2V5.PNG

 Antenna case protection for Handset

C2

Price (euros) : 50 € HT

 Antenna case protection for High Bright Display

C1

Price (euros) : 50 € HT

High Bright Display.jpg
C1V8.PNG
C1-C2-C3.jpg

Package of 3 Antenna protections

ACAG-2

Price (euros) : 120 € HT

Bug cage.jpg

Bug Transmitter Cage 

Protection / Fixation

S6

Price (euros) : 65 € HT

DSC02717.JPG
S5 haut WCU4.jpg

WCU4

to High Bright Display / Handset

(top/bottom of WCU4)

S5

Price (euros) : 50 € HT

S5 Bas WCU4.jpg
DSC02721.JPG
S2 avant  .jpg

WCU4 to High Bright Display 

(top of WCU4)

S2

Price (euros) : 50 € HT

S2_arrière.jpg
S8.jpg
S8 avant  .jpg

WCU4 to High Bright Display 

(top of WCU4)

S8

Price (euros) : 50 € HT

S8 avant moniteur.jpg
DSC02722.JPG
S3 avant.jpg

PRESTON to High Bright Display 

S3

Price (euros) : 50 € HT

S3__a__rrière.jpg
DSC02729.JPG
S4 avant.jpg

Price (euros) : 50 € HT

Cvolution Bracket

to High Bright Display/Handset

S4

S4 avec High Bright Display.jpg
DSC02724.JPG
S7 avant.jpg

Price (euros) : 50 € HT

Cvolution Bracket

to High Bright Display 

(top of the CVolution)

S7

S7  avant.jpg
P1V1.png
P1.jpg

Fixation Plate for High Bright Display

P1

Price (euros) : 25 € HT

P2V1.png
P2.jpg

Fixation Plate for Handset

P2

Price (euros) : 30 € HT

bottom of page